|Product Name:||PVC Insulated PVC Sheathed Control Cable 0.75-10 Mm2||Conductor Material:||Copper|
|Insulation Material:||PVC||Rated Voltage:||0.6/1kV|
|Jacket:||PVC||Application:||Control, Signal, Protection And Measurement System Wiring|
10mm2 600V PVC Control cable,
PVC Control KVV Cable 600V,
KVV PVC Control Cable 600V
IEC60227 0.6/1kV PVC Insulated PVC Sheathed Control Cable 0.75-10 Mm2
KVV cable is a PVC insulated control cable, which is mostly used for wiring of control, signal, protection and measurement systems.
Scope of application: PVC insulated and sheathed control cables are suitable for wiring of control, signal, protection and measurement systems with rated voltages of 450/750V and below or 0.6/1kV and below.
- The rated power frequency voltage Uo/U is 450/750V.
- The allowable long-term maximum working temperature of the cable conductor is 70℃.
- The ambient temperature during cable laying should not be lower than 0℃. If the ambient temperature is lower than 0℃, the cables should be preheated.
- The recommended allowable bending radius of the cable is as follows:
Non-armored cables should be no less than 6 times the outer diameter of the cable
Armored or copper tape shielded cables should not be less than 12 times the outer diameter of the cable;
The shielded flexible cable should not be less than 6 times the outer diameter of the cable.
|Product name||PVC Insulated Cable|
|Armoured Material||None/Steel Tape/Steel wire|
|Number of cores||1C,2C,3C,4C,5C,3+1C,3+2C,4+1C|
|Section area||1.5MM2 - 400MM2|
PVC Insulated Cable
Contact Person: admin